RME Intelligent Audio Solutions

MADIface XT / XT II, MADIface USB, MADIface Pro, OctaMic XTC, ADI-2 Pro / AE / FS / DAC, ADI-2/4 Pro SE, Digiface USB / AVB / Dante / Ravenna, UFX II, UFX III, UFX+, USB.IO

USB Flash Update Tool for Windows 7/8/10/11


This Flash Update Tool will update the internal firmware to the following versions:

MADIface XT: USB 3/2 191, PCIe 56, DSP 42
MADIface XT II: USB 3/2 323, DSP 61, CC 17

MADIface USB (Hw. Rev. 6): 25
MADIface USB (Hw. Rev. 7): 102

Digiface USB (Hw. Rev. X): 18
Digiface USB (Hw. Rev. G): 35

OctaMic XTC: USB 47, DSP 26

MADIface Pro: 73

Fireface UFX II (Hw. Rev. A): USB 26 DSP 30 CC 15
Fireface UFX II (Hw. Rev. E): USB 115 DSP 30 CC 112
Fireface UFX II (Hw. Rev. 7): USB 206 DSP 30 CC 208

Fireface UFX III: USB 210 DSP 25 CC 47

ADI-2 Pro series (Hw Rev 6): FPGA 267, DSP 128
ADI-2 Pro series (Hw Rev 7): FPGA 412, DSP 128

ADI-2 DAC: FPGA 81, DSP 62

ADI-2/4 Pro SE, (Hw Rev 6): FPGA 73, DSP 40
ADI-2/4 Pro SE, (Hw Rev 7): FPGA 210, DSP 40

Fireface UFX+ (Hw. Rev. A): USB 55 DSP 62 Thunderbolt 112
Fireface UFX+ (Hw. Rev. E): USB 72 DSP 62 Thunderbolt 167

Digiface AVB: 270

Digiface Dante: 68

Digiface Ravenna: 55

Digiface AES: FPGA 47, MCU 17, CC11

USB.IO (DirectOut module): USB 10, CC 14


News

09/26/2025: Fix Windows Flash Tool did not fully update the Digiface Dante (missing stand-alone routing) - Firmware Version unchanged (68). Digiface AVB to 270: Bug fix level meter.

07/25/2025: Update DSP of UFX III to 25, UFX II to 30, UFX+ to 62: fix Expander Ratio was reset on boot to 1.0.

06/11/2025: Update Digiface AVB to 269. Accuracy of the Pdelay measurement has been significantly improved. 

06/06/2025: Update MADIface XT II to DSP 61: In CC mode with TotalMix, Aux First is automatically activated.Update USB.IO to CC 14: added external sample rate control

05/23/2025: Update Digiface Dante to USB 68: Optimizations for simultaneous use of audio, MIDI and Class Compliant network. USB.IO to USB 10 CC 13: Optimizations for simultaneous use of CC audio and CC MIDI.

05/09/2025: Update MADIface XT II to USB 323 CC 17, UFX III USB 21 CC 47. Optimizations for simultaneous use of CC audio, TotalMix level meter and CC MIDI.

04/28/2026: MADIface XT II to CC 16: Simultaneous use of audio and MIDI could lead to dropouts. USB.IO to USB 9 CC 12: Internal timing optimizations, Class Compliant MIDI added.

04/04/2026: Update Digiface Dante to 64: The internal network port has been changed to Class Compliant - on a Mac netifc is no longer required. Under Windows network driver 0.9890 or higher is compatible to this firmware.


02/27/2025: Update MADIface XT II to CC 15, UFX III to CC 46: the CC mode now supports the macOS DriverKit driver 4.20 and higher. XT II CC: 96 kHz 22-channel mode did not work. UFX+ DSP 61, UFX II DSP 29, UFX III DSP 24: if TotalMix is not recognized, the settings on the device and the functionality of the ARC USB stay available even when connected via USB.

02/03/2025: Update MADIface XT II to DSP 60. Fix: Mono Dynamics affected Reverb taps, more than 72 channel EQs affected Room EQ.

01/29/2025: Update MADIface XT II to 322, Digiface AVB to 263, Digiface Dante to 60:: supports detection of swapped USB3 data lines. Additionally Digiface Dante: increased compatibility to Brooklyn III modules (crackling/distortion with Dante firmware 4.2.9.4).

12/14/2024: Update MADIface XT II DSP 59: AutoSet (mic gain control) did not work as expected.

11/29/2024: Update MADIface XT II DSP 58: In CC-Mode Setups will be loaded completely even with USB connected.

09/02/2024: Update USB.IO to 6/4 - release state.

07/11/2024: Update UFX+ DSP 60, UFX II DSP 28, UFX III DSP 23, MADIface XT II DSP 57: Function Mute Enable (Master Mute) did not work as Remap Key. Only MADIface XT II: key MIX did not remember any assigned remap command. MADIface XT II FPGA 321: Interface mode USB 2 and USB 3 were swapped. DF AVB 21: improved stream sync.

07/05/2024: Update ADI-2/4 Pro SE to FPGA 73/210. DoP detection of the DAC chips disabled.

06/25/2024: Update UFX III to DSP 22, UFX II to DSP 27 and UFX+ to DSP 59: Stand-alone mode revised. In stand-alone mode with sync to external clock, the device now follows the sample rate of the applied clock source (Word, SPDIF, AES) into the Double and Quad Speed range. For ADAT and MADI In there is a switch from Single to Double Speed if the ADAT input signal contains the matching status indication (all RME units have that at their ADAT outputs), or if the MADI input signal uses the 96k frame. For ADAT and MADI, however, there is no switching to Quad Speed, and no switching back to Single Speed (due to SMUX undefined state).


06/12/2024: Update MADIface USB Hw. Rev. 7 to 102: Signal quality at the MADI output improved. Firmware of USB.IO (module for DirectOut Prodigy and Maven) added. Firmware of the MADIface XT II added.


05/03/2024: Update DF Dante to 57: Devices with Brooklyn III did not load the TotalMix default routing reliably in standalone mode.

04/29/2024: Update UFX II to DSP 26, UFX III to DSP 21, UFX+ to DSP 58: PEQ with Q 0.4 and F 20 kHz led to a loss of sound at Single Speed. Multiple RoomEQ delays and reverb active at Quad Speed could lead to loss of the FX signal. Optimized filter calculation for lowpass / highpass at lower Q-values. Digiface AVB to 260: Improved phase lock on CRF streams. A CRF stream could previously only be the last stream, now it can also be the first stream. Improved behavior on grandmaster changes.


03/28/2024: Update ADI-2 Pro to DSP 128, 2/4 Pro to 40: Analog Input screen showed Loopback only after graphic refresh. DAC to DSP 62: since v56 'Load with EQ' no longer controlled the B/T function. UFX II to DSP 24, UFX III to DSP 19, UFX+ to DSP 56: VolCal higher than 0 dB prevented mute via channel fader. Digiface AVB to 258: Fix Wordclock PLL problem with specific phase. Fix Timestamp 0x555555d5 caused a dropout.


03/23/2024: Update Digiface AVB to 256. Fix for BMCA (Grandmaster clock handling).

03/09/2024: Update ADI-2 Pro to DSP 127: Fixes 5 dB shift of Ph 1/2 volume in the app in various situations.

03/01/2024: Update UFX+ (E) and UFX II (E): Gain of Mic 9 and 10 was coupled with Mic 11 and 12 from +64 dB on. ADI-2 DAC/Pro and 2/4 Pro SE: Extended support for ADI-2 Remote. ADI-2 Pro and 2/4 Pro SE: In Quad Speed, the one possible stereo PEQ is dynamically assigned to the active channel. In Dig Thru mode, ADAT is looped through. ADI-2 DAC AKM: In DSD Direct mode, the volume encoder no longer changes the PCM volume in the background.


01/08/2024: Update UFX+, UFX II, UFX III and UCX II with Room EQ and Crossfeed. Requires TotalMix FX 1.93 or up. Independent use of AES, ADAT1 and ADAT2 as 3-way AES/SPDIF I/O for UFX II and UFX+. Requires latest drivers. 

10/14/2023: Update ADI-2 series FPGA: improved compatibility of the CC MIDI port.

09/26/2023: Update ADI-2/4 Pro SE DSP 36: Source option USB1/2 and 3/4 vanished from the menu. All ADI-2 DSP versions: further optimizations to use the ADI-2 Remote.

09/21/2023: Update ADI-2 Pro DSP 121: Fixes an issue with loading the PEQ of output PH1/2. ADI-2/4 Pro SE: FPGA version 206 renamed to 208, because shipped units already had version 207.

09/14/2023: Update of all ADI-2 Pro, ADI-2 DAC and ADI-2/4 Pro SE for ADI-2 Remote 1.3.

07/17/2023: ADI-2 DAC 80/55: PEQ On/Off no longer causes a change to Preset Temp.

07/11/2023: ADI-2 DAC 80/54: adds MIDI port and support for the ADI-2 Remote.

05/26/2023: UFX II 203/205: Added ripple filter for ADC. UFX III: CC 44 prevents hang in communcation with iPad under USB 2. Digiface AVB 255:  PTO of AAF format reduced by 6 samples. PLL reacts a bit quicker. Change taken over from the M-Series to avoid transmission errors.

03/31/2023: UFX III 20/7/43: Variable gain of input channels 5-8 was assigned incorrectly. Menu display: Name AES In as in the Settings dialog. ADI-2/4 Pro 70/32: With Phones 1/2 plugged in, some messages were suppressed. Option Load B/T with Preset is now permanent. Crossfeed did not work on Line Out 1/2. Center Balance per encoder 2 did not work on Phones 1/2 and Phones 3/4. ADI-2 Pro 265/117: With Phones 1/2 plugged in, some messages were suppressed. Option Load B/T with Preset is now permanent. In Direct DSD mode the VOLUME encoder influenced the PCM volume.

03/23/2023: Digiface AES MCU 17 and CC11: Bugfix CC mode did not work. MIDI Input might not work reliably. Digiface USB (Hw. Rev. G) 35: Internal changes for production. Fireface UFX II (Hw. Rev. 7): USB 202 CC 204. USB and Class Compliant mode improved. Fireface UFX III: USB 19 DSP 6 CC 42: Optimized USB 3 Class Compliant Mode. Triple AES/SPDIF receiver/transmitter added. SteadyClock FS fully implemented.


02/20/2023: Update ADI-2/4 Pro from DSP 30 to DSP 31. Bug fix DAC Mode: In certain situations the SPDIF input was permanently selected. Toggle Phones/Line: Several errors in assignment and function fixed. Some parameters of the settings of Phones Out 1/2 and 3/4 were not assigned correctly. Balanced mode Pentaconn: Some wrong assignments fixed. Loopback display in Status Overview screen did not work with Out 3/4. Assignment of the volume-dependent DC warning threshold of Ph 1/2 corrected.


02/13/2023: Update ADI-2/4 Pro from DSP 29 to DSP 30. Bug fix rear TRS set to 3/4 is no longer muted when Ph1/2 is plugged in. Bug fix DC detection on Line Out 1/2 affected Balanced Phones output via Pentaconn (which is Ph3/4). Bug fix remote commands were shifted by one with Dual Volume mode active. Improved: Dual Volume mode, activated via VOL and leaving the Dual Volume screen by a different key, is now sticky until it is exit in the same way - using the VOL menu and leaving it with the VOL key. Advantage: VOLUME press (toggle mode on the unit) and SEL press on the remote no longer disable the Dual Volume mode. Instead multiple presses include that mode now.


02/03/2023: Update Digiface AES to MCU 16: At Double and Quad Speed the AES Out did not work as TM FX Main Out.

12/15/2022: Update ADI-2/4 Pro from 67/26 to 70/29. Bug fix, critical: Using Pentaconn the unit can start to operate unpredictable and weired (changing cursor position, relays clicking). Bug fix: The DA filter selection of 1/2 was saved but never loaded (only NOS was remembered). Improved Expert Settings: Acceleration on setting high THD compensation values is now working also in the negative value area. Fixed: Current channel/cursor state is now stored and loaded. When plugging Pentaconn cursor moves from 1/2 to 3/4, then additionally plugging Ph3/4 cursor no longer jumps to 1/2. Dark Volume screen: When starting DSD playback, Phones 3/4 B/T line was not replaced by DSDxxx. Remote: After reset (factory default or shipping state) the option Remap Keys was set to Off instead of On. Remote: The Mute key on the remote did not mute the current (cursor selected) output, but always 3/4. Default of filters for AD/DA has changed to Sharp. To avoid confusion the options in the Phones menu, SETUP - Phones, changed from Mute v. TRS 3/4 to Mute v. Ph 3/4, and to Mute v. Ph 1/2.

Attention: After the update reset the unit: in power off state press and hold upper encoder 1 (B) and the VOL key (not VOLUME) while turning the unit on. The display will show  Reset Done .


11/29/2022: Supports new hardware revisions of some devices. Includes DriverKit compatible firmware for some devices, so that these are compatible to both Mac and Windows.

08/22/2022: Hotfix ADI-2 Pro 265/116: since version 263 the SRC did not work correctly for SPDIF and AES at Double and Quad Speed.

06/17/2022: This FUT now also includes the firmware of Fireface UFX+, Digiface AVB and Digiface Dante. Information on updates of these see separate readme.txt.

ADI-2 DAC 78/51, ADI-2 Pro 263/116. Pro/DAC Fix: Corrected display of B/T setting >9.5 dB in Dark Volume Screen. Bugfix Pro: 1 sample channel offset when SRC is active with an ADAT input signal.


05/19/2022: ADI-2 DAC 78/50, ADI-2 Pro 262/115. Bugfix: A preset name consisting only of spaces caused the device to freeze. AutoRef DSD did not work correctly on devices with AK4490. Pro only: ADC set to DSD mode caused a false DC warning on the DAC part. AutoStandby now also includes signal check of the analog inputs.

04/11/2022: ADI-2 DAC 78/49, ADI-2 Pro 262/113. The option Do not load Volume did not always work as expected. Loading the Factory setup now also follows that option. B/T can now be used in both PEQ and as B/T at up to +/-12 dB. Remote Locked now allows to use the volume keys on the remote. Pro only: In Dual EQ mode a graphics refresh was missing in the Bode plot. In Dual Phones mode with AutoRef active, inserting a TRS jack into Phones 1/2 could cause a wrong dBr setting.

UFX II 23/11/14, ESS 111/107/14: TB: Made ready for DriverKit (Mac). Improved USB hub compatibility (for example Mac Studio Display). ESS DAC: low level control optimized.


01/19/2022: ADI-2 DAC 78/48, ADI-2 Pro 262/112. B/T is now adjustable in EQ as bands BB and BT if 'Load B/T with Preset' is active. More options for Auto Standby. Marker in Horizontal Level Meter. Switchable filter to avoid DC and infrasound at analog outputs. Pro only: Bugfix Digital inputs are accessible via USB again. Display - Horizontal Meter - Post FX dBu now also works for the analog input.


12/23/2021 ADI-2 DAC DSP 47, ADI-2 Pro FPGA 259 DSP 111. Horizontal Level Meter Pre FX shows OVR again. PEQ Presets: The display (lin) after a reset with Clear now disappears also if only High/Low Pass is activated. Setups: Display 'Invalid!' when loading empty setups has been changed to 'Empty'. New screen for Balance to make it easy to see the setting remotely; stop time on <C> has been doubled. Display Mode Dark better shows inactive settings. Encoder Filter: New method to prevent encoder malfunction like jumping and direction errors. Added Digital DC Protection, detecting potentially harmful DC in the digital source signal. Analog output level meters can now show dBu. B/T setting storage: The current Bass and Treble setting is now always stored in the PEQ Preset. With 'Load B/T with Preset', B/T are automatically loaded. The new option 'Swap with Preset x' allows a comfortable change of the Preset order. Selection of PEQ presets via remote and keys on the device is supported via Remap Keys. Additional display colors for the analyzer, monochrome (black / white), orange and red. The option Lock UI in the menu SETUP - Options - Display allows to lock the keys on the front and remote. Auto Standby switches the unit into standby state after 30 minutes of inactivity. 'Do not load volume' option added to Setups.

DAC only: Added Loopback Post FX -6 dB. Loopback to USB now includes Polarity settings.

Pro only: Horizontal Level Meter Analog Input, Post FX operation changed. New option Toggle Ph/Line Plugged. New option Toggle Ph/Line - Line/Digital. Digital Out no longer muted in Balanced Phones mode. Full Loopback Analog Out to USB implementation. Permanent Dual Volume screen option. Changed AutoRef display in Dual Phones mode for Ph1/2. AES/SPDIF is muted before power-down. Mute time shortened for DAC filter change synchronization. Added ADC DC Filter selection. Added reset indication in the display after restart. Added software control of the input reference levels.


11/29/2021 UFX II CC 10: Bug fix Loopback did not work in Class Compliant Mode. Frequency control in CC Mode optimized.

09/06/2021 Digiface USB: Phones Out optimized for units with new PCB (devices with V14 do not need to be updated).

07/27/2021 ADI-2 DAC:FPGA 66, DSP 41: First update for units with ESS chip: Option Varipitch removed, because no longer needed. All ADI-2 DAC: New option Loopback to USB, see updated manual. CC mode: at sample rate mismatch USB record data will be muted, the USB sample rate shown red in the Status Overview screen.

06/29/2021 ADI-2 Pro v254: In Balanced Phones mode, switching DA filters via NOS could cause sub-sample delay between left and right headphone outputs. V254 includes special re-sync routines and a 0.4 second mute pause on each switch.

04/14/2021 UFX II 22/14/8. Added mute which suppresses click noise when switching Single/Double/Quad speed while input monitoring is active. DURec: improved detection of connected USB devices with corrected error output for unusable devices. RF-64 files smaller than 2 GB can now be played. General: improved display switching when changing volumes on the host. Slightly less acceleration of encoders for better operation. Equalization of the level meter display of the phones levels at mono setting (High/Low).

03/26/2021 ADI-2 DAC DSP 35, ADI-2 Pro FPGA 250 DSP 102. All Pro: improved performance of SRC, headroom reduced to +3 dB. New option 'SRC Gain dig' to preserve digital headroom during USB recording and digital loop-through. Pro and DAC with MRC: Over display in level meters now takes actual headroom into account (+2.5 dB Line/IEM, +1 dB Phones). All DAC: When loading a setup, the current sample rate is not changed.

03/17/2021 Digiface USB: v17 supports new PCBs. Devices with V14 do not need to be updated. ADI-2 DAC FGA 35, ADI-2 Pro FPGA 249: Improved SteadyClock, filter and phase control. SteadyClock s jitter filter now operates down to 1 Hz instead of about 200 Hz, thus reduces even very low frequency input jitter efficiently.

09/17/2020 ADI-2 Pro updated to 238/98, ADI-2 DAC updated to 34/34. Current peak on power-on reduced. 

04/22/2020 MADIface Pro V 73: Click noise when switching EQ and LC removed.

03/13/2020 Digiface USB updated to 14, UFX II to 20. Digiface USB: SPDIF Channel Status incorrect at Double and Quad Speed. UFX II: Fix for receiving MIDI SysEx, issue limited to macOS. Note: Pro 98 and DAC 34 include no changes, an update from 97/33 is not necessary.

10/14/2019 ADI-2 Pro updated to 213/97, ADI-2 DAC updated to 27/33. Turning any encoder at the unit interrupts AutoDark again. DAC only: pressing one of the three Source buttons twice activates Sopurce Auto.

09/23/2019 ADI-2 Pro updated to 213/96, ADI-2 DAC updated to 27/32. Common changes: Switching EQ On/Off caused EQ band 5 to change its function. The ADAT input could activate De-emphasis for the analog outputs. New pre-mute function for PCM (click suppression on sample rate changes). ADI-2 Pro: Added M/S-Processing option to the Analog Input Settings menu. Added DIM function (Settings menu and Remap Keys). Fixed the internal mute control (broken since v193). After power-off and -on DualVolume mode was reactivated, but the individual volume settings got lost. Phones Out 3/4, Settings, Source: Removed choice USB 3/4 when in Stereo mode. Renamed Hardware/Diagnosis to SPDIF/Remap Keys. Renamed Device Mode to Device Mode/DSD. Renamed Phones <==> Line to Toggle Ph/Line to use the same name everywhere. Fixed the 32 bit clipping module for the analog outputs (Broken since v193). Fixed multiple resets when changing from 16x DSD to 8x DSD (no audible issue). ADI-2 DAC: Optimized the internal mute control. Dim did not work as expected at the Line Out when AutoRef was active. Remote: Command Mono did not work. Command VOL is now fully supported (short click mute). The display could start to flicker when using various commands in a quick, sequential order. Remapping and Remote: DA Filter showed the expected message, but in reality Crossfeed was switched. Reduced DarkScreen timeout when triggered by remote. Renamed Hardware/Diagnosis to Remap Keys/Diagnosis. Renamed Device Mode to Phones/DSD.


07/01/2019 ADI-2 DAC updated to 26/30. Offically supports third party remotes. Fixes display issue when using Balance and Bass/Treble via infrared remote. Fix: State Overview warning Emphasis did not fit the screen. Improved: Warning messages Emphasis and Non-Audio newly referred to inputs optical or coaxial.
 
06/26/2019 ADI-2 Pro updated to 193/94, ADI-2 DAC updated to 26/29. Common changes: Added phones removal to interrupt the AutoDark mode. ADI-2 DAC: The currently loaded EQ Preset stays valid after a reboot (if it wasn't modified). To make ON and OFF messages easier to recognize ON now features a light green background, OFF a light grey one, and OFF and ON are in capital letters to improves readability. Brought back Standby button to interrupt the AutoDark mode. Changed 'DIM' to 'Dim'. ADI-2 Pro: New meter options Pre-FX, Post-FX and Dual now work as expected on the analog inputs in the Global Level Meter screen. Loading a setup that had Basic mode AD/DA and then an Analog input chosen as source required to load the setup two times in a row to activate the analog input. New Remap Keys options Polarity, Crossfeed 1-5 and all DA filters did not work. Amber did not show the intended color change when in DSD mode. A specific setting in combination with Dual Linked Volume (Dual Phones On) caused an invalid Balance value of L850 after reboot.


06/07/2019 ADI-2 Pro updated to 193/93, ADI-2 DAC updated to 26/28. Common changes: Improved AutoDark behaviour. The Dark mode is now interrupted when any phones is plugged-in, by pushing the volume knob and when warning messages are shown. Quickly turning the encoder 1 to change the current channel in the I/O menu caused invalid screen content. Reduced encoder acceleration in various modes (frequency, Q ) for easier adjustment. Copying empty PEQ presets over saved ones now causes a reset of the saved preset which is then marked with 'lin' as 'linear'. Additionally EQ Preset 21, Clear, has been added as fixed linear preset for comparison and to reset others by copying it onto those. Added level meter color 'Amber' (Setup   Options   Display   Meter Color). Added option to select horizontal level meter source between Pre-FX, Post-FX or Dual. Active Mono mode is now shown in the lower taskbar. Added Crossfeed 1-5 and all DA filters to Remap Keys (Setup   Options   Hardware/Diagnosis).

Changes for ADI-2 DAC only: Bugfix: since V24 changing VOL no longer deactivated DIM and Mute. DIM is now a fully supported function and therefore available in the I/O menu and remembered by the unit over power-off and -on. New Details Top screen. This version of the Dark Volume screen lists all currently active DSP functions, including the currently loaded PEQ Preset name. New option Mute Line   Toggle Plugged (Setup   Options   Device Mode). Having plugged-in Phones and IEM, switching via long press of the Volume knob now toggles between Line (rear), Phones, IEM, back to Line (rear) and so on. A short press on the Volume knob mutes the outputs. 

Changes for ADI-2 Pro series only: Fixed DA path for proper playback of low level signals (LSB offset as discovered by KSTR). Show Vol Screen Off did not work in Dual Phones mode. Improved behaviour when a channel is in OFF mode. Improved behaviour when Phones states change during power-off. Channel select marker behaviour improved in certain cases.


02/21/2019 Updates USB of UFX II to 19. Fixes two issues in device start: delayed readout of the serial number and too late activation of the CC mode.


02/13/2019 Updates USB of MADIface XT to 191, of MADIface USB to 25. Fixes a compatibility issue (record start) with Asmedia USB controllers.



How to use:

Start fut.exe. The program will show you the current revision of your unit, and whether it needs an update or not. If so, then simply press the 'Update' button. A progress bar will indicate when the flash process is finished (Verify Ok).

If more than one unit is installed, all units can be flashed by changing to the next tab and repeating the process.

After the update the unit needs to be reset. This is done by powering down the unit for a few seconds. A reboot of the computer is not necessary.

When the update fails (status: failure), the unit's second BIOS will be used from the next cold boot on (Secure BIOS Technology). Therefore the unit stays fully functional. The flash process should then be tried again on a different computer.


Copyright RME 09/2025

All rights reserved. Windows 7/8/10/11 are trademarks of Microsoft Corporation. MADIface, Fireface, Digiface, ADI-2 und OctaMic are trademarks of RME Germany.
